High-Speed Cutting
Up to 200 mm/s on Fiber
Maximum cutting speed reaches 200 mm/s on Fiber and 170 mm/s on Combo and Cut.
CE · FDA · FCC · IC certified
CNC cut and engrave metal, wood, acrylic, and more. Weld and clean with ease—ideal for sheet metal fabrication, custom signage, metal assembly, equipment repair, and personalized products.
7-in-1 Multi-Process
Cut, engrave, weld, clean & more
51 × 35.4 in Work Area
Room for large sheets and complex projects
Front & Rear Pass-Through
Handle long materials with greater flexibility
1-Year Warranty & Local Support
Reliable U.S.-Based Technical Assistance
Model
See What’s in the Box below.
Estimated production time after order placement: 20–35 calendar days.
Estimated ocean freight and final-mile delivery to your door: 40–50 calendar days in total.
Eligible products may be returned within 30 days of delivery, subject to our Return Policy.
1-Year Limited Warranty — Backed by SENFENG TOOLS Technical Support.
01
CNC Fiber Laser Cutting for Metal
LARGE WORKING AREA
The 51.2 × 35.4 in (1300 × 900 mm) . work area gives you room to cut larger parts and lay out multiple pieces on a single sheet.
FRONT & REAR PASS-THROUGH DESIGN
Feed longer sheets through the front and rear openings to cut or engrave them in sections, even when the material extends beyond the work bed.
Adjustable Work Bed
Raise or lower the work bed through 15.75 in (400 mm) of vertical travel to position workpieces of different heights for cutting or engraving.
Rotary Axis
Secure and rotate cylindrical workpieces such as pipes, tumblers, and bottles for precise laser engraving on curved surfaces, expanding your creative possibilities.
01
Carbon Steel
Automatic edge finding simplifies setup, common-line cutting reduces material waste, and ±0.002 in. positioning repeatability helps keep results consistent from job to job.
Review the space, utilities, and essential preparations needed to set up your F900 for operation.
Workshop Setup Requirements
Workshop SpaceThe F900 measures 90.6 × 70.9 × 51.2 inches. Ensure your workshop has a minimum usable floor space of 118.1 × 98.4 inches to accommodate the machine and allow sufficient room for operation.
Workshop Setup Requirements
Fume ExtractionYour workshop should not be completely enclosed and must have a dedicated exhaust outlet to vent fumes outdoors. For indoor installations, use the official SENFENG air purifier alongside the machine.
Workshop Setup Requirements
Electrical RequirementsA dedicated power supply is required. The circuit must support at least 40A, with the exact amperage determined by your machine's actual power configuration. Please verify the electrical requirements with a qualified local electrician before installation.
Workshop Setup Requirements
Assist Gas PreparationPrepare the appropriate assist gas according to your processing requirements:
Nitrogen / Argon / Oxygen / Air
Workshop Setup Requirements
Material PreparationPrepare and purchase processing materials based on your specific business needs and intended applications.
Workshop Setup Requirements
Personal Protective EquipmentPrepare the necessary protective equipment before operation:
Safety Mask / Protective Gloves / Protective Clothing / Safety Glasses
| Attribute | F900 Fiber | F900 Combo | F900 Cut |
|---|---|---|---|
![]() |
![]() |
![]() |
|
| Best for | Sheet metal cutting and metal parts production | Multi-material fabrication and metal assembly | Cutting and engraving metal, wood, and acrylic |
| Handheld Welding | — | Yes | — |
| Handheld Cutting & Cleaning | — | Yes | — |
| CNC Cutting & Engraving | Metal cutting | Metal and non-metal cutting & engraving | Metal and non-metal cutting & engraving |
| Adjustable Worktable | — | Yes | Yes |
| Max. Carbon Steel Cut | 0.39 in / 0.59 in / 0.59 in | 0.39 in / 0.59 in | 0.39 in / 0.59 in / 0.59 in |
| Max. Stainless Steel Cut | 0.20 in / 0.24 in / 0.31 in | 0.20 in / 0.24 in | 0.20 in / 0.24 in / 0.31 in |
| Work Area | 51.2 × 35.4 in | 51.2 × 35.4 in | 51.2 × 35.4 in |
| Laser Source | 1,200 W fiber / 1,500 W fiber / 2,000 W fiber | 1,200 W fiber + 80 W CO₂ / 1,500 W fiber + 130 W CO₂ | 1,200 W fiber + 80 W CO₂ / 1,500 W fiber + 130 W CO₂ / 2,000 W fiber + 130 W CO₂ |

F900 Fiber
FIBER LASER METAL CUTTING
Best for
Sheet metal cutting and metal parts productionHandheld Welding
—Handheld Cutting & Cleaning
—CNC Cutting & Engraving
Metal cuttingAdjustable Worktable
—Max. Carbon Steel Cut
0.39 in / 0.59 in / 0.59 inMax. Stainless Steel Cut
0.20 in / 0.24 in / 0.31 inWork Area
51.2 × 35.4 inLaser Source
1,200 W fiber / 1,500 W fiber / 2,000 W fiber
F900 Combo
7-IN-1 ALL-IN-ONE PLATFORM
Best for
Multi-material fabrication and metal assemblyHandheld Welding
YesHandheld Cutting & Cleaning
YesCNC Cutting & Engraving
Metal and non-metal cutting & engravingAdjustable Worktable
YesMax. Carbon Steel Cut
0.39 in / 0.59 inMax. Stainless Steel Cut
0.20 in / 0.24 inWork Area
51.2 × 35.4 inLaser Source
1,200 W fiber + 80 W CO₂ / 1,500 W fiber + 130 W CO₂
F900 Cut
DUAL-LASER CUTTING & ENGRAVING
Best for
Cutting and engraving metal, wood, and acrylicHandheld Welding
—Handheld Cutting & Cleaning
—CNC Cutting & Engraving
Metal and non-metal cutting & engravingAdjustable Worktable
YesMax. Carbon Steel Cut
0.39 in / 0.59 in / 0.59 inMax. Stainless Steel Cut
0.20 in / 0.24 in / 0.31 inWork Area
51.2 × 35.4 inLaser Source
1,200 W fiber + 80 W CO₂ / 1,500 W fiber + 130 W CO₂ / 2,000 W fiber + 130 W CO₂| Specification | Fiber 1200W | Fiber 1500W | Fiber 2000W | Combo 1200W + 80W CO₂ | Combo 1500W + 130W CO₂ | Cut 1200W + 80W CO₂ | Cut 1500W + 130W CO₂ | Cut 2000W + 130W CO₂ |
|---|---|---|---|---|---|---|---|---|
| Laser type | Fiber Laser | Fiber Laser | Fiber Laser | Fiber + CO₂ | Fiber + CO₂ | Fiber + CO₂ | Fiber + CO₂ | Fiber + CO₂ |
| Work Area | 51.18 × 35.43 in | 51.18 × 35.43 in | 51.18 × 35.43 in | 51.18 × 35.43 in | 51.18 × 35.43 in | 51.18 × 35.43 in | 51.18 × 35.43 in | 51.18 × 35.43 in |
| Fiber Laser Power | 1200W | 1500W | 2000W | 1200W | 1500W | 1200W | 1500W | 2000W |
| CO₂ Laser Power | — | — | — | 80W | 130W | 80W | 130W | 130W |
| Max. Engraving Speed | — | — | — | 39.37 in/s | 39.37 in/s | 39.37 in/s | 39.37 in/s | 39.37 in/s |
| Max. Cutting Speed | 7.87 in/s | 7.87 in/s | 7.87 in/s | 6.69 in/s | 6.69 in/s | 6.69 in/s | 6.69 in/s | 6.69 in/s |
| Repeat Positioning Accuracy | ±0.002 in | ±0.002 in | ±0.002 in | ±0.002 in | ±0.002 in | ±0.002 in | ±0.002 in | ±0.002 in |
| Max. Carbon Steel Cutting Thickness | 0.39 in | 0.47 in | 0.55 in | 0.39 in | 0.47 in | 0.39 in | 0.47 in | 0.55 in |
| Max. Stainless Steel Cutting Thickness | 0.20 in | 0.24 in | 0.31 in | 0.20 in | 0.24 in | 0.20 in | 0.24 in | 0.31 in |
| Max. Aluminum/Copper Cutting Thickness | 0.12 in | 0.12 in | 0.16 in | 0.12 in | 0.12 in | 0.12 in | 0.12 in | 0.16 in |
| Max. Wood Cutting Thickness | — | — | — | 0.59 in | 0.79 in | 0.59 in | 0.79 in | 0.79 in |
| Max. Acrylic Cutting Thickness | — | — | — | 0.79 in | 1.18 in | 0.79 in | 1.18 in | 1.18 in |
| Welding Thickness (Steel) | — | — | — | 0.008–0.157 in | 0.008–0.197 in | — | — | — |
| Welding Thickness (Aluminum/Copper) | — | — | — | 0.008–0.118 in | 0.008–0.118 in | — | — | — |
| Max. Weld Width | — | — | — | 0.059 in | 0.059 in | — | — | — |
| Max. Cleaning Scan Width | — | — | — | 0.79 in | 0.79 in | — | — | — |
| Input Voltage | 220V ±10%, 50/60Hz | 220V ±10%, 50/60Hz | 220V ±10%, 50/60Hz | 220V ±10%, 50/60Hz | 220V ±10%, 50/60Hz | 220V ±10%, 50/60Hz | 220V ±10%, 50/60Hz | 220V ±10%, 50/60Hz |
| Rated Power | 6 kW | 7 kW | 8.5 kW | 6 kW | 7 kW | 6 kW | 7 kW | 8.5 kW |
| Full-Load Current | 25A | 30A | 36A | 25A | 30A | 25A | 30A | 36A |
| Breaker Rating (Specified) | 36A | 36A | 40A | 36A | 36A | 36A | 36A | 40A |
| Dimensions (L × W × H) | 85.43 × 67.83 × 46.18 in | 85.43 × 67.83 × 46.18 in | 85.43 × 67.83 × 46.18 in | 85.43 × 67.83 × 46.18 in | 85.43 × 67.83 × 46.18 in | 85.43 × 67.83 × 46.18 in | 85.43 × 67.83 × 46.18 in | 85.43 × 67.83 × 46.18 in |
| Net Weight | 1,058.2 lb | 1,058.2 lb | 1,058.2 lb | 1,058.2 lb | 1,058.2 lb | 1,058.2 lb | 1,058.2 lb | 1,058.2 lb |
| Machine Safety Class | Class 1 | Class 1 | Class 1 | Class 1 | Class 1 | Class 1 | Class 1 | Class 1 |

D-Series Welder

D-Series Combo

D-Series Combo Pro

D-Series Ultra Cut

Wire Feeder

Blue Diode Laser Head

Protective Lens ×5

Monitor stand

Toolbox

Stainless steel sheet

Cutting tip

Nozzle X9

Welding Wire

Wire feeding tube

Lens cleaning paper X5

Hex key

Laser safety goggles

USB flash drive

Wire feeding roller X4

Hex key

Cotton swab

Cutting nozzle

Air hose

Screwdriver set

Workpiece sensing cable

Ethernet cable

Open-end wrench

Wire feed nozzle X 4

Wire feeding tube
Installation, training and on-site help from your local branch.
Engineers on call, answered in your timezone.
1 year on parts and labour, on published terms.
Setup guides, cutting data and software, free to download.
Delivered in 8–15 business days from US stock.
Return it within 30 days for a full refund.
Not sure which model suits your work? Send the material and thickness you cut most and an engineer replies within one business day.
Ask an engineerYes. The D-Series is designed to make a wide range of metalworking tasks more accessible, even if you're new to laser equipment.
Whether you're setting up your first workshop or adding new capabilities to an existing business, we're here to help you get started.
Before purchasing a D-Series machine, make sure your workshop has adequate space, the correct electrical setup, a suitable assist-gas supply, proper ventilation, appropriate personal protective equipment (PPE), and the materials you plan to process.
1. Workbench and Space Requirements
The D-Series includes two configurations with different machine and laser-source dimensions.
ConfigurationCNC Machine DimensionsFiber Laser Source DimensionsD300 (800W)865 × 905 × 715 mm500 × 380 × 529 mmD600 (1200W)1,110 × 1,205 × 775 mm680 × 430 × 580 mm
We recommend planning for a workbench or designated installation area of at least 1,200 × 1,200 mm. Because the CNC unit and fiber laser source occupy separate spaces, confirm that your actual layout can accommodate both components, along with adequate clearance for operation, ventilation, maintenance, and cable routing.
2. Electrical Requirements
A dedicated circuit is required.
Voltage and circuit: A dedicated 240V / 40A circuit is required.
Breaker and wiring: The specified setup calls for a two-pole 40A circuit breaker and 8 AWG wiring.
Peak current draw: The machine can draw up to 30A under peak operating conditions.
Workshop capacity: If you also operate air compressors, dust collectors, HVAC systems, welders, or other high-power equipment, make sure your electrical panel has sufficient capacity for the combined load.
Do not share the machine's dedicated circuit with other equipment or general-purpose outlets. Have a qualified electrician verify the circuit, wiring, breaker, grounding, and available panel capacity before installation. Confirm the final electrical specifications against the requirements for your exact machine configuration.
3. Assist Gas Supply
Prepare oxygen or nitrogen with a purity of at least 99.99%, along with a compatible pressure regulator.
The appropriate gas depends on the material being cut and the desired cutting results. Confirm the recommended gas type, pressure, flow rate, and connection specifications for your application before purchasing supplies.
4. Ventilation and Fume Extraction
Laser cutting, welding, and other processing operations can generate fumes, particles, and potentially hazardous gases, depending on the material and process.
Make sure your workshop has an appropriate fume-extraction and ventilation system. If you're operating in an enclosed indoor space, you may need an additional air-filtration unit compatible with your setup.
Do not rely on general room ventilation alone when effective source extraction is required. Confirm the extraction requirements for the materials you intend to process, and never process unidentified materials that may release hazardous fumes.
5. Personal Protective Equipment (PPE)
Prepare the protective equipment required for your specific laser processes, including:
Laser safety eyewear or a protective face shield with a verified optical density and wavelength rating appropriate for the machine's laser wavelength and exposure conditions.
Protective gloves suitable for the task.
Appropriate protective clothing.
Respiratory protection when required by the material, process, and workplace risk assessment.
Important: Ordinary safety glasses are not a substitute for laser safety eyewear. Verify that all protective equipment is appropriate for the machine's laser source, operating configuration, and applicable safety requirements. Follow the manufacturer's safety instructions and applicable workplace regulations.
6. Materials for Testing and Production
Prepare sample materials that match your intended applications, such as stainless steel, carbon steel, aluminum, or copper.
If you plan to process reflective metals or materials with different thicknesses, confirm compatibility and recommended operating parameters before starting production.
The right model depends on the type of work you do, the processes you need, and the space and budget available in your workshop.
The Welder is designed primarily for joining metal components and fabricating metal structures. It is worth considering if welding is the core of your business and you want an alternative to conventional TIG, MIG, or MAG welding processes.
Potential advantages include faster welding on suitable applications, reduced heat input and distortion, and welds that may require less post-processing, depending on the material, joint design, and finish requirements.
Best suited for: Metal fabrication shops, repair workshops, and businesses that primarily join metal parts rather than cut sheet metal.
The Combo Pro is designed for businesses that need multiple metalworking capabilities in one workstation.
It's a strong fit if:
Best suited for: Custom fabrication shops, motorcycle builders, independent garages, and small businesses handling varied metalworking jobs.
The Ultra Cut is designed for users who prioritize cutting performance, edge quality, and production efficiency.
Consider this model if you:
Best suited for: Sheet-metal fabrication shops, custom parts manufacturers, and businesses focused on cutting rather than welding.
Before deciding, compare the exact configuration, supported processes, material thickness limits, and available workspace for each model.
We're here to support you beyond the initial purchase.
SENFENG TOOLS has a local service team in the United States to help with product-related questions, troubleshooting, and service coordination.
If you experience an issue or need a replacement part, contact our support team with your machine model, serial number, and a description or photos of the issue. Our team can help assess the problem and guide you through the next steps.
For assistance, contact support@senfengtools.com.
The D-Series brings multiple metalworking capabilities into a compact workstation, backed by SENFENG's industrial laser equipment experience. Here's what sets it apart.
1. More Than a Laser Marking Machine
The D-Series is designed for practical metal fabrication, not just surface marking. Depending on the configuration, it supports multiple processes, including metal cutting, laser welding, cleaning, and engraving.
With laser power options up to 1,200W and positioning specifications of up to ±0.01 mm on applicable configurations, the D-Series brings a broader range of metalworking capabilities to smaller workshops than a conventional low-power marking machine.
Actual results depend on the selected configuration, material, thickness, and processing parameters.
2. Backed by More Than 20 Years of Industrial Laser Expertise
The D-Series draws on SENFENG's more than 20 years of experience in industrial laser equipment research, development, and manufacturing.
It brings technology and engineering experience from larger CNC sheet-metal systems into a more compact workstation designed for smaller businesses and independent workshops.
3. Built for Motion Control andRepeatable Processing
A rigid machine structure, precision linear guides, and responsive servo or closed-loop motion control help support stable movement and consistent processing.
These design elements are intended to help reduce vibration during high-speed operation and improve cutting consistency, edge squareness, and burr control when used within the machine's rated capabilities.
4. Enclosed Design for Workshop Use
The D-Series features an enclosed processing area with safety interlocks, including a lid-opening emergency-stop function where specified, and an integrated fume-extraction system.
Compatible external air-filtration equipment may also be added to suit your workshop setup and processing requirements.
These features can help support installation in independent garages, home workshops, and maker spaces when the machine is installed and operated in accordance with applicable electrical, laser-safety, ventilation, and workplace requirements.
5. Relevant to Real-World Fabrication Businesses
The D-Series is designed for practical applications across a range of metalworking environments, including custom motorcycle workshops, truck repair businesses, independent garages, and small fabrication shops.
Real-world demonstrations, customer projects, and product reviews can help you evaluate how the machine performs in applications similar to your own. We encourage buyers to review available demonstrations and verified customer feedback before making a decision.
6. Bring More Custom Work In-House
For independent fabricators and small businesses selling through platforms such as Etsy or Shopify, outsourcing custom metal parts can involve minimum order quantities, long lead times, and high costs for one-off prototypes.
By bringing suitable cutting and welding jobs in-house, the D-Series can help you produce prototypes, fulfill smaller orders, and respond to custom requests with greater flexibility.
Depending on your workflow and material availability, this may reduce reliance on outside suppliers, shorten turnaround times, and give you more control over production costs and margins.
7. U.S.-Based Service Support
Purchasing equipment is a long-term business decision. SENFENG TOOLS offers U.S.-based service support to help customers with product questions, troubleshooting, and service coordination.
Our goal is to help you get the information and assistance you need throughout the ownership process, from initial setup to ongoing operation.
The on-board ARM controller runs the machine directly, with no tethered PC. It takes the file types you already export — DXF, SVG, AI and common raster formats — and the 7-inch panel handles nesting and job setup.
Most operators run their first job the day it is installed. Installation includes training on your own material, and setup guides and cutting-parameter tables are free to download.
The bed runs fully enclosed and interlocked, and CE-certified goggles ship with every machine. Handheld work off the gantry always needs those goggles and extraction.
Parts and labour on the laser source, control unit and drive system for 12 months from delivery, on published terms, with engineers on call 24/7.
Return it within 30 days in its original condition for a full refund. Before you commit, send a file and your material and we will run the job for you, so you can measure the part before deciding.

Add it to your cart when you’re ready, or book a live call and an engineer answers whatever is still open.
Describe the job and we will come back with the machine that fits, a price, and what it costs to run — or tell you if none of ours suit.

Call and describe the job. Mon–Fri, 9:00–18:00 PDT on +1 626 774 6507.
Talk to an ExpertGo back to the range and see which series fits the work you do.
Choose a Machine