Total rated power varies by configuration. For the standard setup (800W fiber laser + 40W diode laser), rated power is 4.5–5.5 kW, with peak power (laser at full output + all motors running) not exceeding 5.5 kW.

A 220V / 50A line supports up to 11 kW, which is well above the system's peak demand and fully sufficient for full-load operation.

Note: Higher configurations (e.g. 1200W fiber + 40W diode laser) require 8.8–11.5 kW. In this case, ensure line capacity ≥ 11.5 kW (recommended ≥50A circuit breaker). Power specifications can be confirmed during purchase for proper matching.

Yes. Power consumption mainly depends on laser output and motor load:

· Fiber Laser Handheld Welding (800W):
Laser source ≈ 2.5 kW
Control & cooling ≈ 0.4 kW
Total: 2.6–3.0 kW (continuous, stable output)

· Diode Laser Engraving (40W):
Laser ≈ 0.8 kW
Table motors ≈ 0.3 kW
Control & cooling ≈ 0.1 kW
Total: 1.1–1.2 kW (intermittent output, lower average power)

· Fiber Laser Cutting (800W, stainless steel):
Laser ≈ 3.0 kW
X/Y motors ≈ 0.4 kW
Control & cooling ≈ 0.1 kW
Total: 3.3–3.5 kW

· Standby Mode:
≤ 0.1 kW

Overall, fiber laser cutting and welding consume more power than diode laser processing. The system automatically optimizes power allocation during function switching to avoid unnecessary energy consumption.

Outdoor setup is fast and simple. No professional technicians or specialized tools are required, and the system can be ready for operation within 10 minutes, making it ideal for on-site and emergency metal repair tasks.